I'll put some acid on it tomorrow, then start to put some metal back.

Stripping the roof now so there won't be any surprises down the road.  Unfortunately it looks like there are half a dozen spots that will need a little lead.

I managed to get some of the clean metal primed.  I did not paint the roof line yet because I have some lead work to do there.  I will go ahead and prime the rear fascia next so that it does not start to rust on me before I get back there to work on it.  Then finally some actual metal work.

Went ahead and opened up the wheel tubs a little to be able to remove the blast media from inside the rockers.

There are still a couple of places I will spot acid wash tomorrow, then I get to prime and start putting metal back.

98% of the blasting is done.  Been using a razor blade to remove some pretty obstinate factory seam sealer from the drip rails.  Hopefully I will finish picking it and then get to finish blasting tomorrow.